POLYFON S.55 ACOUSTIC SLAB

Description 

POLYFON-S can be used in halls, in order to improve acoustics 

properties and reverberation time, thus assisting in reducing unwanted 

reflections, futter echo and standing waves. It can improve the acoustic 

quality, prevent room modes and increase clarity. POLYFON-S Base, is 

polyurethane, flexible foam slab, with a sculpted design, that effectively 

absorbs the sound energy by dissipated it as heat in the foam cells. It 

‚contributes in offering a unique and modern appearance, in the room. 

The DM element can be altered to suit any aesthetic requirement. Any 

artwork or high resolution picture can be printed on it's surface, in order 

to suit its aesthetic surroundings. 

Iolaion onthe wall, can be easily done with a staple gun or adequate 

glue, 

POLYFON-S with Diffuser Membrane insert 

« The DM part is a flexible Diffuser Membrane, with a smooth radius, 

which creates a 2D deflector, that effectively spreads high frequency 

reflections. A 3D acoustic diffusion is achieved, when the POLYfon-S 

Panels are installed in 2 perpendiculars directions. Additionally the DM 

Improves the low frequency absorption coefficient and it acts as a sound 

‚absorption membrane. The DM element can be either acrylic, plywood, 

HPL “ormica” or others radius membranes. 

It can be easily removed from the two lateral channels, which keep the 

membrane in tension. The polyurethane foam has self extinguishing 

‚characteristics, according to FMVSS 302. 

Dimensions: 600x600x55 mm 

Typical applications: Home Theatres, Recording & Post Production Studios, Rehearsal Rooms, Conference Rooms, etc.

POLYFON 

INNOVATIVE ACOUSTIC SOLUTIONS

POLYFON products are innovative, polymorphic, broadband acoustic

panels that combine Sound Absorption & Diffusion characteristics and

vibration absorption in monitor speakers. It is created by integrating

the long experience (since 1980) of the R&D department of our

company and the extended scientific research on optimization of

acoustic proprieties of foam products.

POLYFON products are made from polyurethane flexible foam slabs,

with a sculpted design, that effectively absorbs the sound energy

and reduces the reverberation time, flutter echo and standing waves.

POLYFON contributes in offering a unique and modern appearance in

the room, that acoustic comfort is a valuable quality.

The technical information referred in this brochure come from

measurements and tests made in good faith and objectivity.

This does not implies responsibility of the Company and may be

subject to changes.

Design and production according to Quality Assurance System

ISO 9001.2008 & Environmental Management System ISO 14001.2004.